The gasket is the only component in a Tri-Clover connection responsible for sealing, and its material determines what temperatures, chemicals, and pressures the joint can handle. Choosing the wrong material...
Read More
Hose clamps keep a flexible connection sealed under pressure, vibration, and temperature change. The type you choose affects how evenly the clamping force is distributed, whether the clamp damages the...
Read More
Choosing tubing isn't just about finding something the right diameter. The material determines what temperature range it can handle, what fluids it's compatible with, whether it meets food-grade requirements, and...
Read More
Both butterfly valves and ball valves give you a quarter-turn open/close action, and both are common in brewing, food processing, and fluid handling. But they work differently, and those differences...
Read More
Ball valves come in three main body configurations, and while they all do the same fundamental job, turning flow on and off with a quarter-turn, the differences between them affect...
Read More
Quick disconnect fittings let you make and break a fluid connection with one hand, in seconds, without tools. They're widely used in situations where a line gets connected and disconnected...
Read More
Barbed fittings are one of the simplest connection methods in fluid handling, and one of the most commonly done wrong. The failure point is almost always the same: using a...
Read More
Camlock couplings are a quick-connect fitting system used across industrial, agricultural, and fluid transfer applications. A male adapter inserts into a female coupler and locks with a quarter-turn of two...
Read More
Tri-Clover, sometimes called Tri-Clamp or sanitary fittings, is a connection standard built around a simple idea: make every joint easy to disassemble, clean, and inspect. In food and beverage processing,...
Read More
NPT and NPS share the same thread form, with the same 60° angle, same pitch, and same dimensions along the flanks. They look identical, they'll thread together without any resistance,...
Read More
NPT and BSP are the two most common pipe thread standards in the world, and they cause more headaches than almost any other fitting decision. The threads look nearly identical,...
Read More